SmartEPD-2026-147-0970-01Date of IssueJun 29, 2026Expiration DateJun 29, 2031Last UpdatedJun 29, 2026Refer to the EPD Library at www.smartepd.com for the latest EPD listing information2500-3400-3500 Series - Cylindrical LocksetsEnvironmental ProductDeclarationProgram Operator: Smart EPD®www.smartepd.comIN ACCORDANCE WITH ISO 14025:2006, ISO 21930:2017, EN15804+A2:2019+AC:2021
General InformationHager Companies139 Victor St, St. Louis, MO 63104, USA+1 800-325-9995marketing@hagerco.comhagerco.comProduct Name:2500-3400-3500 Series - Cylindrical LocksetsDeclared Unit:1 piece per standard door leafDeclaration Number:SmartEPD-2026-147-0970-01Date of Issue:June 29, 2026Expiration:June 29, 2031Last updated:June 29, 2026EPD Scope:Cradle to gate with optionsA1 - A3, A4, A5, C1 - C4Market(s) of Applicability:North AmericaGeneral Organization InformationHager Companies Founded in 1849, St. Louis-based Hager Companies offers more than 6,000 full-line quality door hardware products under one brandname. With 13 product lines including, commercial hinges, residential hinges, Roton® continuous geared hinges, stainless steel continuous hinges, exitdevices, locks, door controls, auxiliary, threshold and weatherstripping, sliding door hardware, electrified hardware, access control products and Euroline, ourEuropean hardware line. Hager focuses on architectural hardware that exceeds today’s building standards that are built to last.Further information can be found at:http://www.hagerco.comLimitations, Liability and OwnershipEnvironmental declarations from different programs (ISO 14025) may not be comparable. Comparison of the environmental performance of products usingEPD information shall be based on the product’s use and impacts at the building level, and therefore EPDs may not be used for comparability purposes whennot considering the whole building life cycle. EPD comparability is only possible when all stages of a life cycle have been considered. However, variations anddeviations are possible. Example of variations: Different LCA software and background LCI datasets may lead to differences results for upstream ordownstream of the life cycle stages declared. The EPD owner has sole ownership, liability, and responsibility for the EPD.Reference StandardsStandard(s):ISO 14025:2006, ISO 21930:2017, EN 15804+A2:2019+AC:2021Core PCR:UL Part A PCR for Building-Related Products and Services v3.2Date of issue: December 12, 2018Sub-category PCR:UL Part B: Builders Hardware EPD Requirements v.2Date of issue: August 19, 20252500-3400-3500 Series - Cylindrical LocksetsHager CompaniesPage 2 / 12
Valid until: August 19, 2030Sub-category PCR review panel:Contact Smart EPD for more information.General Program Instructions:Smart EPD General Program Instructions v.2.0, March 2025Verification InformationLCA Author/Creator:juan@parqhq.comjuan@parqhq.comEPD Program Operator:Smart EPDinfo@smartepd.comwww.smartepd.com585 Grove St., Ste. 145, Herndon, VA 20170, USAVerification:Independent critical review of the LCA and data, according to ISO 14044 andISO 14071:ExternalArka Panditpandit_arka@outlook.comIndependent external verification of EPD, according to ISO 14025 andreference PCR(s):ExternalArka Panditpandit_arka@outlook.comProduct InformationDeclared Unit:1 piece per standard door leafMass:1.91 kgReference Service Life:25 YearsProduct Specificity:Product AverageProduct SpecificRepresentative Product EPDProduct DescriptionHager cylindrical locksets are designed to deliver reliable security, durability, and performance across a wide range of commercial applications, offeringsolutions tailored to different levels of use and budget requirements. The Hager 2500 Series Grade 2 lock provides an effective balance of performance andvalue, making it a suitable choice for standard commercial applications. Its cost-efficiency and broad product offering make it particularly well-suited forstocking programs. As an economical alternative within the Grade 2 category, the 2500 Series delivers dependable performance while maintainingaffordability. The Hager 3400 Series Grade 1 lock is engineered for the most demanding environments, offering extra heavy-duty performance. Designed towithstand intensive use, impact, and abuse, this series has been rigorously tested for strength and durability. Its proven reliability across a wide range ofapplications has made it a trusted solution both nationally and globally. The 3400 Series is backed by a lifetime warranty, reflecting its high quality and long-term performance. The Hager 3500 Series Grade 2 lock combines value and performance, making it an ideal option for typical commercial applicationswhere Grade 1 performance is not required. As a cost-effective alternative, it provides strong dependability and reliable operation. The 3500 Series is alsosupported by a lifetime warranty, ensuring consistent performance over time.Further information can be found at:https://www.hagerco.com/products-portal/locks2500-3400-3500 Series - Cylindrical LocksetsHager CompaniesPage 3 / 12
Product SpecificationsProduct Classification Codes:EC3 - Accessories -> DoorsHardwareMaterial CompositionMaterial/Component CategoryOrigin% MassABSTW0.09AluminumTW0.03BrassTW4.49CopperTW0.05SteelTW55.3Zinc AlloyTW40.04Packaging MaterialOriginkg MassCorrugated board box0.13Plastic packaging0.04Wood pallet0.04Biogenic Carbon Contentkg C per pieceBiogenic carbon content in product0NoneBiogenic carbon content in accompanyingpackaging0.08Hazardous MaterialsNo regulated hazardous or dangerous substances are included in this product.EPD Data SpecificityPrimary Data Year:2025Manufacturing Specificity:Industry AverageManufacturer AverageFacility SpecificAveraging:2500-3400-3500 Series - Cylindrical LocksetsHager CompaniesPage 4 / 12
A weighted average calculated across multiple product models within the2500-3400-3500 Cylindrical Locksets Series using sales volumes as weightingfactors.System BoundaryProductionA1Raw material supplyA2TransportA3ManufacturingConstructionA4Transport to siteA5Assembly / InstallUseB1UseNDB2MaintenanceNDB3RepairNDB4ReplacementNDB5RefurbishmentNDB6Operational Energy UseNDB7Operational Water UseNDEnd of LifeC1DeconstructionC2TransportC3Waste ProcessingC4DisposalBenefits & Loads BeyondSystem BoundaryDRecycling, Reuse Recovery PotentialNDNote:ND = Module not declaredPlantsChiayi City, TaiwanChiayi City, Taiwan2500-3400-3500 Series - Cylindrical LocksetsHager CompaniesPage 5 / 12
Product Flow DiagramSoftware And DatabaseLCA Software:SimaPro v. 10.2LCI Foreground Database(s):Ecoinvent v. 3.11Cut-off by ClassificationLCI Background Database(s):Ecoinvent v. 3.11Cut-off by ClassificationA foreground LCI database is the database used to model the primary, site-specific data collected for this EPD. A background LCI database is the databaseused to model generic or non-specific data.Data QualityPrecision & CompletenessPrecision: Inventory data were directly measured, calculated, or conservatively estimated from primary sources provided by Hager Companies usingconsistent units and QA checks. Background processes from ecoinvent v3.11 were adopted with their documented uncertainty/precision metadatawhere available, preserving a transparent record of data quality.2500-3400-3500 Series - Cylindrical LocksetsHager CompaniesPage 6 / 12
Completeness: The product system's mass balance and inventory completeness were thoroughly checked. Some exclusions were made in line with thePCR requirements, such as personnel impacts, R&D activities, business travel, and point-of-sale infrastructure. However, no data were intentionallyomitted.Consistency and ReproducibilityConsistency: Primary data for all modules were consistently gathered from Hager Companies’ manufacturing operations, aiming at the highest level ofdetail possible. Background processes were modeled mainly with the ecoinvent database. The same allocation rules, cut-off criteria, and impactassessment methods were applied throughout, ensuring methodological coherence and consistent data quality across the entire LCA model.Reproducibility: This study ensures reproducibility by providing comprehensive disclosure of input–output data, dataset choices, and modelingapproaches. A knowledgeable third party should be able to approximate the results using the same data and modeling methods.RepresentativenessTemporal: Primary data were collected for a 12-month period representing the most recent full year of production available from Hager Companies toensure temporal representativeness. Secondary data from the ecoinvent v3.11 database are typically representative of recent years.Geographical: Primary data represent Hager Companies’ production facilities in China and Taiwan. Where applicable, differences in electric grid mixwere considered using appropriate secondary data. The use of country-specific data ensures high geographical representativeness, and proxy datawere only used when country-specific data were unavailable.Technological: Both primary and secondary data were tailored to the specific technologies used by Hager Companies, ensuring high technologicalrepresentativeness.Life Cycle Module DescriptionModules A1–A3: The LCA model covers the manufacture of raw materials and components for Hager Companies products (A1) which are then transportedto Hager Companies facilities by truck (A2). The manufacturing stage (A3) begins with receipt of these materials, which are cast, machined, stamped, andassembled into finished locksets. When required, additional components such as springs, fasteners are incorporated during assembly.Modules A4–A5: Once manufacture is completed, products are shipped to distribution centers and then to the end user by truck and ocean freight (A4). Forinstallation (A5), a 0% material installation loss was assumed. This module includes disposal of that waste and of the product packaging.Modules C1–C4: At end of life (C1–C4), the product is assumed to be collected, and each waste stream (e.g., steel, aluminum, brass, plastic) is handledseparately—landfilled, recycled, or incinerated with energy recovery.LCA DiscussionAllocation ProcedureAllocation of co-products was avoided wherever possible in accordance with ISO 14044:2006, Section 4.3. In cases where allocation could not be avoided,allocation was applied using a mass-based approach consistent with UL PCR Part A requirements. Energy consumption at Hager Companies’manufacturing facilities was allocated to the studied products based on production volume. Inputs and outputs, including emissions to air, water, and soil,were accounted for in accordance with ISO 21930 and UL PCR guidance, primarily arising from upstream processes and energy use. Solid waste generationwas estimated based on material losses and packaging flows, and waste treatment processes were modeled in accordance with the polluter pays principle,with no allocation of environmental credits within the system boundary.Cut-off ProcedureThe system boundary was defined in accordance with ISO 21930 and UL PCR Part A requirements, based on relevance to the goal and scope of the study.For Modules A1–A3, all relevant material and energy inputs, as well as associated outputs, were included in the model to the extent that data were availableand met the defined data quality criteria. No material or energy flows known to be significant were intentionally excluded, and cut-off criteria were appliedconsistently in accordance with UL PCR guidance.2500-3400-3500 Series - Cylindrical LocksetsHager CompaniesPage 7 / 12
Renewable ElectricityEnergy Attribute Certificates (EACs) such asRenewable Energy Certificates (RECs) or PowerPurchase Agreements (PPAs) are included in thebaseline reported results:NoScenariosTransport to the building/construction site (A4)A4 ModuleFuel Type:DieselVehicle Type:Truck and TrailerTransport Distance:22250 kmCapacity Utilization:33 %Packaging Mass:0.2101 kgWeight of products transported:2.12 kgCapacity utilization volume factor:1Assumptions for scenario development:Transport distance includes finished product to distribution center and distribution center to pointof sale.Installation in to the building/construction site (A5)A5 ModuleMass of Packaging Waste Specified by Type:0.2101 kgBiogenic Carbon Contained in Packaging (kg C):0.08125 kgAssumptions for scenario development:Installation impacts limited to packaging waste disposal, no significant material losses assumed.End of Life (C1 - C4)C1 - C4 ModulesCollection ProcessCollected with Mixed Construction Waste:1.91 kgRecoveryRecycling:1.57 kgLandfill:0.3398 kgIncineration:0.0004813 kgAssumptions for scenario development:Disposal/Recycling rates as per Part A PCR2500-3400-3500 Series - Cylindrical LocksetsHager CompaniesPage 8 / 12
ResultsEnvironmental Impact Assessment ResultsIPCC AR5 GWP 100, TRACI 2.2, CML 2016 V4.8per 1 piece of product per standard door leaf.LCIA results are relative expressions and do not predict impacts on category endpoints, the exceeding of thresholds, safety margins or risks.Impact CategoryUnitMethodA1 - A3A4A5C1C2C3C4GWP-totalkg CO2 eqIPCC AR5GWP 1008.76e+05.09e-11.85e-201.06e-21.14e-39.84e-4GWP-fossilkg CO2 eqIPCC AR5GWP 1008.72e+05.09e-11.74e-201.06e-21.14e-39.84e-4GWP-biogenickg CO2 eqIPCC AR5GWP 1002.41e-28.01e-51.07e-302.49e-66.84e-81.33e-7GWP-luluckg CO2 eqIPCC AR5GWP 1001.62e-22.71e-41.69e-604.80e-68.91e-91.07e-7ODPkg CFC-11 eqTRACI 2.21.09e-77.55e-97.07e-1101.51e-103.78e-131.46e-11APkg SO2 eqTRACI 2.26.88e-21.21e-23.17e-503.33e-52.44e-77.91e-6SFPkg O3 eqTRACI 2.27.29e-12.25e-18.73e-407.42e-47.28e-62.46e-4EP-freshwaterkg P eqTRACI 2.24.74e-31.23e-52.76e-507.55e-71.05e-82.83e-8EP-marinekg N eqTRACI 2.26.97e-31.91e-31.11e-506.36e-66.76e-82.06e-6ADP-fossilMJCML 2016V4.81.01e+26.24e+04.56e-201.50e-12.10e-41.25e-2Note:Not all abbreviated indicators listed below may be present in the results above. The inclusion of indicators varies based on PCR requirements.Abbreviations:GWP = Global Warming Potential, 100 years (may also be denoted as GWP-total, GWP-fossil (fossil fuels), GWP-biogenic (biogenic sources), GWP-luluc (land use and land use change)), ODP = Ozone DepletionPotential, AP = Acidification Potential, EP = Eutrophication Potential, SFP = Smog Formation Potential, POCP = Photochemical oxidant creation potential, ADP-Fossil = Abiotic depletion potential for fossil resources,ADP-Minerals&Metals = Abiotic depletion potential for non-fossil resources, WDP = Water deprivation potential, PM = Particular Matter Emissions, IRP = Ionizing radiation, human health, ETP-fw = Eco-toxicity(freshwater), HTP-c = Human toxicity (cancer), HTP-nc = Human toxicity (non-cancer), SQP = Soil quality index.Comparisons cannot be made between product-specific or industry average EPDs at the design stage of a project, before a building has been specified.Comparisons may be made between product-specific or industry average EPDs at the time of product purchase when product performance andspecifications have been established and serve as a functional unit for comparison. Environmental impact results shall be converted to a functional unitbasis before any comparison is attempted. Any comparison of EPDs shall be subject to the requirements of ISO 21930 or EN 15804. EPDs are notcomparative assertions and are either not comparable or have limited comparability when they have different system boundaries. EPDs are notcomparative assertions and are either not comparable or have limited comparability when they have different system boundaries, are based on differentproduct category rules or are missing relevant environmental impacts. Such comparison can be inaccurate, and could lead to erroneous selection ofmaterials or products which are higher-impact, at least in some impact categories.2500-3400-3500 Series - Cylindrical LocksetsHager CompaniesPage 9 / 12
Resource Use Indicatorper 1 piece of product per standard door leaf.IndicatorUnitA1 - A3A4A5C1C2C3C4RPREMJ1.11e+14.85e-21.25e-302.03e-38.42e-61.05e-4RPRMMJ2.82e+0000000RPRTMJ1.39e+14.85e-21.25e-302.03e-38.42e-61.05e-4NRPREMJ1.01e+26.24e+04.56e-201.50e-12.10e-41.25e-2NRPRMMJ0000000NRPRTMJ1.01e+26.24e+04.56e-201.50e-12.10e-41.25e-2SMkg0000000RSFMJ0000000NRSFMJ0000000REMJ0000000FWm35.56e+01.57e-25.32e-407.97e-43.68e-52.82e-5Note:Not all abbreviated indicators listed below may be present in the results above. The inclusion of indicators varies based on PCR requirements.Abbreviations:RPRE or PERE = Renewable primary resources used as energy carrier (fuel), RPRM or PERM = Renewable primary resources with energy content used as material, RPRT or PERT = Total use of renewable primaryresources with energy content, NRPRE or PENRE = Non-renewable primary resources used as an energy carrier (fuel), NRPRM or PENRM = Non-renewable primary resources with energy content used as material,NRPRT or PENRT = Total non-renewable primary resources with energy content, SM = Secondary materials, RSF = Renewable secondary fuels, NRSF = Non-renewable secondary fuels, RE = Recovered energy,ADPF = Abiotic depletion potential, FW = Use of net freshwater resources, VOCs = Volatile Organic Compounds.Waste and Output Flow Indicatorsper 1 piece of product per standard door leaf.IndicatorUnitA1 - A3A4A5C1C2C3C4HWDkg0000000NHWDkg3.64e-209.79e-20003.40e-1HLLRWkg0000000ILLRWkg0000000CRUkg0000000MRkg1.22e-107.01e-2001.57e+00MERkg3.76e-302.30e-2004.81e-40EEMJ9.90e-204.46e-1001.48e-20Note:Not all abbreviated indicators listed below may be present in the results above. The inclusion of indicators varies based on PCR requirements.Abbreviations:HWD = Hazardous waste disposed, NHWD = Non-hazardous waste disposed, RWD = Radioactive waste disposed, HLRW = High-level radioactive waste, ILLRW = Intermediate- and low-level radioactive waste,CRU = Components for re-use, MFR or MR = Materials for recycling, MER = Materials for energy recovery, MNER = Materials for incineration, no energy recovery, EE or EEE = Recovered energy exported from theproduct system, EET = Exported thermal energy.2500-3400-3500 Series - Cylindrical LocksetsHager CompaniesPage 10 / 12
Carbon Emissions and Removalsper 1 piece of product per standard door leaf.IndicatorUnitA1 - A3A4A5C1C2C3C4Bio Carbon Removal from Productkg CO20000000Bio Carbon Emission from Productkg CO20000000Bio Carbon Removal from Packagingkg CO2-3.79e-1000000Bio Carbon Emission from Packagingkg CO28.10e-202.98e-10000Bio Carbon Emission from Waste duringManufacturing (renewable source)kg CO20000000Calcination Carbon Removalkg CO20000000Carbonation Carbon Emissionkg CO20000000Carbon Emission from Waste duringManufacturing (non-renewable source)kg CO20000000Note:Not all abbreviated indicators listed below may be present in the results above. The inclusion of indicators varies based on PCR requirements.Abbreviations:BCRP = Biogenic Carbon Removal from Product, BCEP = Biogenic Carbon Emission from Product, BCRK = Biogenic Carbon Removal from Packaging, BCEK = Biogenic Carbon Emission from Packaging, BCEW =Biogenic Carbon Emission from Combustion of Waste from Renewable Sources Used in Production Processes, CCE = Calcination Carbon Emissions, CCR = Carbonation Carbon Removals, CWNR = Carbon Emissionsfrom Combustion of Waste from Non-Renewable Sources used in Production Processes, GWP-luc = Carbon Emissions from Land-use Change.InterpretationThis study developed representative Life Cycle Assessment (LCA) models and Environmental Product Declarations (EPDs) for the company’s product lines,covering raw material extraction, manufacturing, transportation, assembly, packaging, distribution, and end-of-life stages. Results show that mostenvironmental impacts occur during the product stage (A1–A3), primarily from raw material production, metal processing, transportation, and manufacturingenergy use, while end-of-life impacts depend largely on recycling and disposal assumptions. Opportunities for impact reduction include increasingrenewable energy use, improving material efficiency, reducing packaging, increasing recycled content, and sourcing from lower-impact suppliers.0%20%40%60%80%100%GWP-TotalIPCC AR5 GWP 100GWP-FossilIPCC AR5 GWP 100GWP-BiogenicIPCC AR5 GWP 100GWP-LulucIPCC AR5 GWP 100ODPTRACI 2.2APTRACI 2.2SFPTRACI 2.2EP-FreshwaterTRACI 2.2EP-MarineTRACI 2.2ADP-FossilCML 2016 V4.82500-3400-3500 Series - Cylindrical LocksetsHager CompaniesPage 11 / 12
Production (A1 - A3)Construction (A4 - A5)End of Life (C1 - C4)Additional Environmental InformationNoneReferences1. UL Solutions. (2023). Product Category Rules for Building-Related Products and Services – Part A: Life Cycle Assessment Calculation Rules and ReportRequirements. UL Environment Standard 10010, Version 4.0. Northbrook, Illinois: UL Verification Services, Inc.2. UL Solutions. (2023). Product Category Rule (PCR) Guidance for Building-Related Products and Services – Part B: Builders Hardware EPD Requirements.UL 10010-13. Northbrook, Illinois: UL Verification Services, Inc.3. International Organization for Standardization (ISO). (2006). ISO 14040:2006 – Environmental management – Life cycle assessment – Principles andframework. Geneva: ISO.4. International Organization for Standardization (ISO). (2006). ISO 14044:2006 – Environmental management – Life cycle assessment – Requirements andguidelines. Geneva: ISO.5. International Organization for Standardization (ISO). (2006). ISO 14025:2006 – Environmental labels and declarations – Type III environmentaldeclarations – Principles and procedures. Geneva: ISO.6. International Organization for Standardization (ISO). (2017). ISO 21930:2017 – Sustainability in buildings and civil engineering works – Core rules forenvironmental product declarations of construction products and services. Geneva: ISO.7. Stichting National Environmental Database. (2022). Environmental Performance Assessment Method for Construction Works. Version 1.8. U.S. Environmental Protection Agency. Hazardous Waste Management Facilities. EPA. https://www.epa.gov/hw. Accessed: March 23, 2026.9. U.S. Environmental Protection Agency. Advancing Sustainable Materials Management: Facts and Figures. EPA. https://www.epa.gov/facts-and-figures-about-materials-waste-and-recycling. Accessed: March 23, 2026.10. National Renewable Energy Laboratory. Life Cycle Assessment of U.S. Waste Management Systems. NREL. https://www.nrel.gov. Accessed: March 23,2026.11. World Business Council for Sustainable Development. Life Cycle Metrics for Construction Products. WBCSD. https://www.wbcsd.org. Accessed: March 23,2026.2500-3400-3500 Series - Cylindrical LocksetsHager CompaniesPage 12 / 12
